Free pass4sure ccie 350-030 v2.93 Download

CCIE Voice Written : 350-030 Exam

Exam Number/Code: 350-030
Exam Name: CCIE Voice Written
VUE Code: 350-030
Questions Type: Single choice, Multiple choice, Simulate,
Real Exam Question Numbers: 100 questions
Exam Language(s): English

“CCIE Voice Written”, also known as 350-030 exam, is a Cisco certification.
Preparing for the 350-030 exam Searching 350-030 Test Questions, 350-030 Exam, 350-030 Dumps

With the complete collection of questions and answers Q&as with Expert Explanations, Pass4sure has assembled to take you through 400 Q&A to your 350-030 Exam preparation. In the 350-030 exam resources, you will cover every field and category in CCIE helping to ready you for your successful Cisco Certification.

The written exam is a two-hour, multiple choice test with 100 questions covering those technologies and applications that comprise a Cisco Enterprise VoIP solution

QUESTION 26:
Which of the following is the best configuration for provisioning for VoIP at the
WAN Edge?
A. !
version 12.2
!
class-map match-all VOICE
match ip rtp 16384 32767
class-map match-all VOICE-CONTROL
match protocol skinny
!
policy-map WAN-EDGE
class VOICE
low-latency queuing 33 percent
class class-default
weighted-fair-queue
!
B. !
version 12.2
!
class-map match-all VOICE
match ip dscp ef
class-map match-all VOICE-CONTROL
match ip dscp af31
!
policy-map WAN-EDGE
class VOICE
priority percent 33
class VOICE-CONTROL
bandwidth percent 2
class class-default
fair-queue
!
C. !
version 12.2
!
class-map match-all VOICE
match ip dscp 5
class-map match-all VOICE-CONTROL
match ip dcsp 3
!
350-030
www.actualtest.org – The Power of Knowing
policy-map WAN-EDGE
class VOICE
priority queue percent 33
class VOICE-CONTROL
bandwidth queue percent 2
class class-default
fair-queue
!
D. !
version 12.2
!
class-map match-all VOICE
match ip dscp 46
class-map match-all VOICE-CONTROL
match ip dscp 26
!
policy-map WAN-EDGE
class VOICE
priority 33 percent
class VOICE-CONTROL
bandwidth 2 percent
class class-default
fair-queue
!
Answer: B
QUESTION 27:
You are a network administrator at PassGuide . PassGuide has a Cisco voice gateway
that will be connected to a PBX/PSTN-switch via ISDN (PRI, QSIG, BRI).
Which attributes of the PBX/PSTN-switch must you know to understand which
features to configure on the voice GW in order to connect successfully to the
PBX/PSTN-switch? (Choose two.)
A. Whether Q.921 or Q.931 is supported by the PBX/PSTN-switch.
B. Whether H.225 or H.323 is supported by the PBX/PSTN-switch.
C. Whether symmetric mode is supported by the PBX/PSTN-switch.
D. What PRI/BRI switch-type is supported by the PBX/PSTN-switch.
E. Whether the network or users side is supported by the PBX/PSTN-switch.
Answer: D, E
QUESTION 28:
Which of the following statements is an attribute of ISDN Non-Facility Associated
350-030
www.actualtest.org – The Power of Knowing
Signaling (NFAS)?
A. Enables the D-channel to transmit “data” information unrelated to any voice call, such
as inter-switch status updates.
B. Applicable to voice calls and PRI only, but not data PRI calls.
C. Is available on both T1 and E1 PRIs.
D. Single D-channel controls B-channels on the same T1 span, as well on other T1-spans.
E. Single T1 span can be split into two “trunk groups”, each with its own dedicated
D-channel.
Answer: D
Voice Enabling the Data Network; Durkin: Cisco Press p124
QUESTION 29:
You are a network administrator at PassGuide , Inc. PassGuide runs a centralized
Automatic Message Accounting (CAMA) trunk that allows enterprise voice GW
connectivity to the North American (911) services of the PSTN.
A newly appointed PassGuide trainee wants to know what the difference between
CAMA trunk signalling and FXO trunk signalling are.
What will your reply be?
A. They do not differ in basic signaling, but CAMA is used exclusively for 911 calls,
while FXO is used for general PSTN calls.
B. FXO allows for dialed digit delivery, while CAMA does not.
C. CAMA provides for dialed digit delivery, while FXO does not.
D. CAMA provides for ANI digit delivery, while FXO does not.
E. CAM supports only loopstart, while FXO supports ground- and loopstart.
Answer: A
CIPT Solution Reference Network Design 6-3
QUESTION 30:
You are a network administrator at PassGuide . Your newly appointed PassGuide
trainee wants to know how much Layer 3 is required for Call Control on an IP
Phone on average.
What will your reply be?
A. 2 kbps
B. 8 bps
C. 16 kbps
D. 120 bps
E. 150 kbps
Answer: B