Free pass4sure ccie 350-040 v2.83 Download

CCIE Storage Networking : 350-040 Exam

Written Exam

General Information
CCIE Storage Networking Written Exam #350-040
The written exam is a two-hour, multiple choice test with 100 questions covering topics such as storage device protocols, troubleshooting tools, storage networking design, applications, and advanced management.

Beta Exams
Each written exam version is offered first in beta form at a discounted cost of US$50. Beta exams are scheduled as you would other written exams and are available at all worldwide testing locations. A passing grade on the beta qualifies a candidate to schedule the lab exam. Results, however, are typically not available until six to eight weeks after the close of the beta. A candidate may attempt the beta exam only once during the beta period.

Cost
Written exams are administered by independent vendors at cost of US$300. Costs may vary due to exchange rates and local taxes (VAT, GST).

Expiration
Candidates must make an initial attempt of the CCIE lab exam within 18 months of passing the CCIE written exam. Valid passing scores on written exams expire after 18 months.

Locations
Written exams are taken at any worldwide VUE testing facility. See their websites for more details.

Results
Written exam results are Pass/Fail and are available immediately following the exam. The passing score is set by statistical analysis and is subject to periodic change.

Retakes
Candidates must wait five days between attempts at the written exam. Once a candidate has passed the exam, he or she may not take the same exam again (for recertification purposes) for at least 180 days.

Exam Number/Code: 350-040
Exam Name:CCIE Storage Networking

“CCIE Storage Networking”, also known as 350-040 exam, is a Cisco certification. With the complete collection of questions and answers Q&as with Expert Explanations, Pass4sure has assembled to take you through 397 Q&As to your 350-040 Exam preparation. In the 350-040 exam resources, you will cover every field and category in CCIE helping to ready you for your successful Cisco Certification.
Free Demo DownloadPass4sure offers free demo for 350-040 exam (CCIE Storage Networking). You can check out the interface, question quality and usability of our practice exams before you decide to buy it.

VCE PDF EPAD bootcamp training bible DetailsThe written exam is a two-hour, multiple choice test with 100 questions covering topics such as storage device protocols, troubleshooting tools, storage networking design, applications, and advanced management.

QUESTION 16:
What are the 3 types of Ordered Sets defined in Fiber Channel?
A. Offline sequence, online sequence, and link reset
B. Start of frame, end of frame, and idle
C. Frame delimiters, primitive signals, and primitive sequences
D. K28.5, D16.0,and D31.2
E. None of the above
Answer: C
=> ordered sets: Frame delimiters, primitive signals, and primitive sequences
QUESTION 17:
Hosts and storage are connected to 2 MDS units interconnected by lSLs in the
following manner:
FCID Initiator/Target MDS VSAN Zone
0×01000a initiator 1 1 A
0×01000b Target1 1 B
0×01000c initiator 2 2 A
0×02000a Target2 1 A
0×02000b initiator 2 1 B
350-040
www.actualtest.org- The Power of Knowing
0×02000c Target1 2 A
All default zones are set to deny and IVR is not enabled. Trunking is disabled on all
of the lSLs, which reside in VSAN 1. How many pairs of sourc-destination flows are
possible over the ISLs in this configuration?
A. 1
B. 2
C. 3
D. 4
E. 5
Answer: B
=> domain pairs [0x0100a,0x0200c]zoneA, [0x01000b,0x02000b]zoneB
QUESTION 18:
When using Fcanalyzer to capture a flow from FCID 010300 what would be the
proper command?
A. Can not filter at FCID level on Fcanalyzer
B. MDS#fcanalyze local display-filter
(mdshdr.vsan==1)&&((fc.d_id==01300)or(fc.s_id==01300))
C. MDS(config)#fcanalyze locaal display-filter
(mdshdr.vsan==1)&&((fc.d_id==01300)or(fc.s_id==01300))
D. MDS(config)#fcanalyze display-filter
(mdshdr.vsan==1)&&((fc.d_id==01300)or(fc.s_id==01300))
E. MDS(config)#fcanalyze display-filter
(mdshdr.vsan==0×01)&&((fc.d_id==01300)or(fc.s_id==01300))
Answer: C
=> fcanalyzer config: MDS(config)#fcanalyze local display-filter ~~~
QUESTION 19:
Which are true about the advertisement methods for Iscsi targets implemented by
the MDS 9000? Select two.
A. By default, Iscsi TARGETS ARE ADVERTISED ON ALL gigabit Ethernet interfaces
and subinterfaces.
B. By default Iscsi TARGETS ARE NOT ADVERTISED AND THE
ADMINISTRATOR CAN CHOOSE WHETHER TO ADVERTISE THEM OR NOT
BY CHANGING THE SWITCH CONFIGURATION.
C. By default, Iscsi targets are advertised only on Gigabit Ethernet interfaces but not on
subinterfaces.
D. By default, Iscsi targets are advertised on Gigabit Ethernet subinterfaces only but not
on the main Gigabit Ethernet interfaces.
350-040
www.actualtest.org – The Power of Knowing
E. It can be limited by the administrator by configuring the Gigabit Ethernet interfaces
over which static iSCSI targets are advertised.
Answer: A, E
Explanation:
=> iSCSI target advertise method:
QUESTION 20:
What standard association is working in the definition of the Iscsi and Fiber
Channel protocols respectively?
A. SNIA and IETF
B. FCIA and IETF
C. IETF and ANSI
D. FCIA and SNIA
E. SNIA and T11
Answer: C