Free Pass4sure Download: Leading the way in studying IT certifications

MCDBA Installing, Configuring and Administering Microsoft Windows 2000 Server : 70-215 Exam
Exam Number/Code: 70-215
Exam Name: MCDBA Installing, Configuring and Administering Microsoft Windows 2000 Server

“MCDBA Installing, Configuring and Administering Microsoft Windows 2000 Server”, also known as 70-215 exam, is a Microsoft certification. With the complete collection of questions and answers Q&as with Expert Explanations, Pass4sure has assembled to take you through 400 Q&As to your 70-215 Exam preparation. In the 70-215 exam resources, you will cover every field and category in MCDBA helping to ready you for your successful Microsoft Certification.

QUESTION 1:

You want to upgrade a Windows NT Server 4.0 computer to
Windows 2000 Server. The system partition uses the FAT file system.
You start the Setup program by starting the computer from the Windows 2000
Server CD-ROM. However, you receive the following error message, “You chose to install Windows 2000 on a partition that contains another operating system.
Installing Windows 2000 on this partition might cause the operating system to function improperly”.
You are unable to perform the upgrade. What should you do to resolve the problem?

A. Convert the system partition to NTFS.
B. Disable Advanced Configuration and Power Interface (ACPI) support for the computer.
C. Restart the computer, and then run Winnt32.exe from the Windows NT Server 4.0
environment.
D. Remove the Windows 2000 Server CD-ROM and restart the computer by using the setup floppy disks.

Answer: C

Explanation: When upgrading earlier versions of Windows to Windows 2000 we must use winnt32.exe and must launch it from within the Windows environment. Incorrect answers:
A: Windows 2000 can be installed or upgraded on a disk or partition that is formatted with the FAT file system. There is thus no need to convert the file system to NTFS.
B: The Advanced Configuration and Power Interface is used for power management and does not affect the installation or upgrade process. It would thus not be necessary to
disable ACPI.
D: The setup floppy disks use Winnt.exe to install Windows 2000. We however can only use the setup floppy disks to install a clean copy of Windows 2000 on the computer. We cannot upgrade the operating system to Windows 2000 using the setup floppy disks. We must use winnt32.exe to upgrade earlier versions of Windows to Windows 2000.
Reference:
Microsoft Corporation, Self-Paced MCSE Training Kit: Microsoft Windows 2000 Server, Microsoft Press, Redmond, 2000, Chapter 2, Lessons 1 & 2

QUESTION 2:

You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.
You want to install Windows 2000 Server from source files that are located on a server on the network. What should you do?

A. Start the new computer by using a Windows 98 network boot disk.
Connect to the network server. Run Winnt32.exe.
B. Start the new computer by using Windows 98 network boot disk. Connect to the network server.
Run Winnt.exe.
C. On a Windows 2000 Server computer, use Makebt32.exe to create installation startup disk.
Start the new computer by using the first disk.
D. On a Windows 2000 computer, format a floppy disk.
Copy NTLDR, boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.

Answer: B

Explanation: To install Windows 2000 Server on a computer from source files that are located in a centralized network location we would have to create a network
boot disk that includes DOS drivers for the network adapter. We would have to
start the computer using this boot disk and connect to the network share where the source files are located. Finally we would start installation process by using winnt.exe. We must use winnt.exe and not winnt32.exe as the boot disks operate in
DOS mode, which works with 16-bit applications. We would thus not be able to use
32-bit applications like winnt32.exe. Incorrect answers:
A: We must use winnt.exe and not winnt32.exe as the boot disks operate in DOS mode, which works with 16-bit applications. We would thus not be able to use 32-bit applications like winnt32.exe.
C: Makebt32.exe is used to make Windows 2000 setup floppy disks. These cannot be used to connect to a network share.
D: The boot disk must include drivers for the network adapter. Reference:
Microsoft Corporation, Self-Paced MCSE Training Kit: Microsoft Windows 2000 Server, Microsoft Press, Redmond, 2000, Chapter 2, Lessons 1 & 2

QUESTION 3:

You are installing Windows 2000 Server on a new computer that
has a single 10-GB SCSI disk. The disk controller is not included on the current
Hardware Compatibility List (HCL). You start the computer by using the Windows
2000 Server CD-ROM.
When the computer restarts at the end of the text mode portion of Windows 2000 setup, you receive the following STOP error: “INACCESSIBLE_BOOT_DEVICE.” Which two actions should you take to eliminate the STOP error? (Choose Two)

A. Restart the Windows 2000 Setup by using the Windows 2000 Server CD-ROM.

B. Select Safe Mode from the Windows 2000 boot menu.
C. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive. D. Install a driver for the SCSI controller from a floppy disk.
E. Use Device Manager to update the driver for the SCSI controller. Answer: A, D
Explanation: To solve the problem posed in this scenario we must restart the
Windows 2000 installation process and supply the correct SCSI driver. We cannot
use Device Manager or Safe Mode at this stage since Windows 2000 is not installed yet. We must press F6 when Setup prompts us to do so. We must then press F6
again to supply the driver for a mass storage controller to the Windows 2000 Setup program.
Incorrect answers:
B: We cannot use Safe Mode at this stage, as Windows 2000 is not installed yet.
C: We need to Windows 2000 Server CD-ROM to be able to perform the install process.
E: The Device Manager cannot be used at this stage since Windows 2000 is not installed yet.
Reference:
Microsoft Corporation, Self-Paced MCSE Training Kit: Microsoft Windows 2000 Server, Microsoft Press, Redmond, 2000, Chapter 2, Lessons 1 & 2

QUESTION 4:

You are the administrator of a Windows 2000 network.
On each server, you format a separate system partition and a separate boot partition as NTFS.
Several months later, you shut down one of the servers for the maintenance. When you try to restart the server, you receive the following error message “NTLDR is missing. Press any key to restart”.
You want to install a new NTLDR file on the server, but you do not want to lose any settings you made since the original installation. What should you do?

A. Start the computer by using the Windows 2000 Server CD-ROM and choose to repair the installation.
Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system volume.
B. Start the computer by using the Windows 2000 Server CD-ROM and choose to reinstall.
When installation is complete, copy the NTLDR file to the root of the boot volume.
C. Start the computer by using a Windows 2000 bootable floppy disk. From the command prompt, run the sfc/scanboot command.
D. Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.

Answer: A

pass4sure 70-215 2.93
Questions and Answers : 400 Q&As
Expected Date: October 21st , 2008
Price: $129.99 $89.99

Free Down: Pass4sure Microsoft 70-215 2.93
Free Down: PassGuide microsoft 70-215 2.93

Download Latest Passforsure P4S Rapidshare links

1. Free pass4sure Microsoft MCSE 70-223 2.93 Download
2. Free pass4sure Microsoft MCSE 70-228 2.93 Download
3. Free Pass4sure Microsoft MCSE 70-217 2.93 Download
4. Free Pass4sure Microsoft MCSE 2003 Download
5. Free pass4sure Microsoft MCSE 70-294 2.93 Download
6. Free pass4sure Microsoft MCSE 70-292 2.83 Download
7. Free Pass4sure Microsoft Mcse Exams Download
8. Free Pass4sure Microsoft MCSE 70-290 2.93 Download
9. Free pass4sure Microsoft MCSE 70-282 2.93 Download
10. Free Pass4sure Microsoft MB4-161 2. 83 Download
11. Free Pass4sure Microsoft MCSE 70-232 2.93 Download
12. Free Pass4sure Microsoft MCSE 70-222 2.73 Download
13. Free Pass4sure Microsoft MCSE 2000 Security Download
14. Free pass4sure Microsoft MCSE 70-270 2.93 Download
15. Free Pass4sure Microsoft MCSE 070-210 2.73 Download