Free pass4sure Microsoft MCSE 70-270 2.93 Download

MCSA Installing, Configuring, and Administering Microsoft Windows XP Professional : 70-270 Exam
Exam Number/Code: 70-270
Exam Name: MCSA Installing, Configuring, and Administering Microsoft Windows XP Professional

“MCSA Installing, Configuring, and Administering Microsoft Windows XP Professional”, also known as 70-270 exam, is a Microsoft certification. With the complete collection of questions and answers Q&as with Expert Explanations, Pass4sure has assembled to take you through 173 Q&As to your 70-270 Exam preparation. In the 70-270 exam resources, you will cover every field and category in MCSA helping to ready you for your successful Microsoft Certification.
QUESTION 1:

You work as the network administrator at www.pass4sure.cc. The
www.Pass4sure.ccnetwork consists of a single Active Directory domain named
www.pass4sure.cc.
A www.Pass4sure.ccuser named Mia Hamm uses a Windows 95 client computer named PassGuide -WS270. PassGuide -WS270 contains a single hard disk drive with two partitions that have been assigned the drive letters C and D. You need to perform a clean install of Windows XP Professional on PassGuide -WS270. You decide to
install a second hard disk drive in PassGuide -WS270 and assign it the drive letter E. You want the E: drive to become the boot partition. What should you do?

A. Select Advanced Options from the Install Options dialog box in Setup. B. At the command prompt, run winnt32.exe /syspart:E.
C. Define the TargetPath option in an answer file and use the answer file to perform an unattended installation.
D. Use Sysprep to create an image for PassGuide -WS270. Answer: A
Explanation:
The boot partition is the partition that constrains the
%SystemRoot% folder into which set up copies the Windows XP Professional system files. This partition can be the primary partition of a logical partition. You
can specify which drive letter or partition Setup should use in the Advanced Options dialog box.
Incorrect answers:
B: The syspart switch is used to copy Set up files to a temporary hard
disk drive that can be moved to another computer on which the installation is to be performed. The syspart switch marks the specified drive letter as the system partition to which Setup will copy the Setup startup files. The hard drive can then be moved to a new computer where Windows XP Professional Setup will begin at the next phase.
C: The TargetPath option of an answer file specifies the name of the folder in which Windows XP Professional will be installed. It does not specify the drive letter or partition.
D: Sysprep is used to create an image that contains the operating system and the applications that are to be installed on a target computer. However, the Sysprep image can only contain a single partition and will replace the C: drive.
Reference:
Melissa Craft & Don Poulton, Exam Prep 2: Windows XP Professional, Que
Publications, Indianapolis, 2005, Chapter 1
Lisa Donald & James Chellis, MCSA/MCSE: Windows XP Professional Study Guide; Third Edition, Sybex Inc., Alameda, 2005, P. 12

QUESTION 2:

You work as the network administrator at www.pass4sure.cc. The
www.Pass4sure.ccnetwork consists of a single Active Directory domain named
www.pass4sure.cc. All servers on the www.Pass4sure.ccnetwork run Windows 2000 Server. Half the client computers run Windows NT 4.0 Workstation and the rest run
Windows XP Professional. The www.Pass4sure.ccnetwork also contains a file server named PassGuide -SR24.
You need to upgrade a Windows NT 4.0 client computer named PassGuide -WS290
to Windows XP Professional. However, the Windows XP Professional installation CD does not contain the drivers for the network adapter card currently installed on PassGuide -WS290. You copy the i386 folder from the Windows XP professional installation CD to a shared folder named i386 on PassGuide -SR24. In the i386
shared folder you create a folder named Testadpcrd and copy the drivers for the network adapter card to the Testadpcrd folder.
You want the Testadpcrd folder to be copied to the folder on PassGuide -WS290 during the upgrade process. After the upgrade, you want to be able to access the drivers in the Testadpcrd folder for future use.
What should you do on PassGuide -WS290?

A. At a command prompt, run the Winnt.exe command with the /r:testadpcrd switch.
B. At a command prompt, run the Winnt.exe command with the /rx:testadpcrd switch.
C. At a command prompt, run the Winnt32.exe command with the
/copysource:testadpcrd switch.
D. At a command prompt, run the Winnt32.exe command with the /copydir:testadpcrd switch.
Answer: D Explanation:
In the i386 folder you will find the Winnt32.exe or
Winnt.exe. In the command prompt you the use the Winnt32.exe command with the copydir switch. The copydir:folder name create a customized subfolders that can be used with the Windows XP Professional installation. If you use the /copydir option,
the folder is not deleted. Incorrect answers:
A: The /r switch is used with the winnt command. The winnt command
is used to install Windows XP Professional on a computer that is not running Windows
98, Windows Me, Windows NT 4 Workstation, Windows 2000 Professional, or Windows
XP Home Edition.
B: The /rx switch is used with the winnt command. The winnt command is used to install Windows XP Professional on a computer that is not running Windows 98, Windows Me, Windows NT 4 Workstation, Windows 2000 Professional, or Windows XP Home
Edition.
C: The /copysource:folder name is used to create a temporary subfolder for Windows XP Professional files to be used during the installation process. Once the installation process

is complete, the folders created with this process are deleted. If you use the /copydir
option, the folder is not deleted. Reference:
Lisa Donald & James Chellis, MCSA/MCSE: Windows XP Professional
Study Guide; Third Edition, Sybex Inc., Alameda, 2005, P. 11

QUESTION 3:

You work as the network administrator at www.pass4sure.cc. The
www.Pass4sure.ccnetwork consists of a single Active Directory domain named www.pass4sure.cc. The www.Pass4sure.ccnetwork contains ten Windows 2000 Server computers and 1,200 Windows 98 client computers.
www.Pass4sure.ccintends to hire another 25 employees over the next 3 months. The company has purchased 25 new client computers that will be issued to the new employees. You have been instructed to install Windows XP Professional as well as
a standard set of applications on the new client computers. The new client computers consist of five different hardware configurations as shown in the following table:

BIOS
Processors PXE- NIC VGA Adapter
Computer 1 ACPI 1 3 Com
3C905B ATI 3D RAGE
Computer 2 ACPI 2 Realtec
RTL8029 ATI 3D RAGE
Computer 3 Non- ACPI 2 Realtec
RTL8029 Nvidia
GForce 3
Computer 4 ACPI 1 Realtec
RTL8029 Nvidia
GForce 3
Computer 5 Non- ACPI 1 Realtec
RTL8029 ATI 3D RAGE
All the hardware on the new client computers appears on the Hardware
Compatibility List (HCL).
You intend to use RIPrep to deploy Windows XP Professional and the applications on the new client computers. How many RIPrep images would you require?

A. Twenty Five
B. Five C. Four D. One
Answer: C Explanation:
The 25 client computers are classed in four categories

pass4sure 70-270 2.93
Questions and Answers : 173 Q&As
Expected Date: October 21st , 2008
Price: $129.99 $89.99

Free Down: Pass4sure Microsoft 70-270 2.93
Free Down: PassGuide microsoft 70-270 2.93