MCDBA Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 Network Infrastructure : 70-291 Exam
Exam Number/Code: 70-291
Exam Name:MCDBA Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 Network Infrastructure
“MCDBA Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 Network Infrastructure”, also known as 70-291 exam, is a Microsoft certification. With the complete collection of questions and answers Q&as with Expert Explanations, Pass4sure has assembled to take you through 175 Q & A + 3 Real labs to your 70-291 Exam preparation. In the 70-291 exam resources, you will cover every field and category in MCDBA helping to ready you for your successful Microsoft Certification.
QUESTION 1
You work as the network administrator at www.pass4sure.cc. The www.Pass4sure.ccnetwork consists of a single Active Directory domain named www.pass4sure.cc. All servers on the www.Pass4sure.ccnetwork run Windows Server 2003 and all client computers run Windows XP Professional. The www.Pass4sure.ccnetwork contains a print server named PassGuide -PR01 that has a built-in network interface.
A www.Pass4sure.ccuser named Andy Reid is a member of the Research and Development department. Andy Reid complains that he cannot print to a print device attached to PassGuide -PR01.
You have received instruction to ensure that Andy Reid can print to the print
device. First you verify that the IP address for PassGuide -PR01 is correct and that the latest drivers for the print device are installed. You now want to verify that the
print jobs are being sent to the correct MAC address for PassGuide -PR01. What should do?
A. On PassGuide -PR01, run the net session command. B. On PassGuide -PR01, run the netstat command.
C. On PassGuide -PR01, run the netsh command. D. On PassGuide -PR01, run the netcap command.
Answer: D
Explanation: Netstcap.exe is a command line tool that could be used to capture the network traffic. A filter can be created to be used during the capture to determine the MAC address the print jobs are being sent to. The Network Monitor Capture Utility (
Netcap.exe) can be used to capture network traffic in Network Monitor. Netcap provides capture abilities only from a command prompt; to open the resulting capture (.cap) files, you must use the full Network Monitor interface. Netcap is installed when you install the Support tools that are on the Windows XP CD-ROM. Netcap provides capture abilities
that are similar to the version of Network Monitor that is included with the Windows Server products; however, you must use Netcap at a command prompt. Netcap installs the Network Monitor driver and binds it to all adapters when you first run the Netcap command.
Incorrect Options:
A: The net session command can be used to view the computer names and user names of users on a server, to see if users have files open, and to see how long each user’s session
has been idle. Net session manages server computer connections – used without parameters, net session displays information about all sessions with the local computer.
B: The netstat command is not a utility to use when troubleshooting NetBIOS names, but
is used to display TCP/IP and port information.
C: The Network Shell utility (Netsh.exe) can perform a wide range of system configuration tasks. You can use commands in the Netsh Interface IP context to
configure the TCP/IP protocol (including addresses, default gateways, DNS servers, and
WINS servers) and to display configuration and statistical information. Reference:
Microsoft Knowledge Base: 306794: How to Install the Support Tools from the Windows
XP CD-ROM Network Monitor is provided with Windows Server products and
Microsoft Systems Management Server (SMS). Microsoft Corporation, 2004
Deborah Littlejohn Shinder, Dr. Thomas W. Shinder, Chad Todd & Laura Hunter, MCSA/MCSE: Exam 70-291: Implementing, Managing, and Maintaining a Windows Server 2003 Network Infrastructure Guide & DVD Training System, pp. 686, 854-856,
926
QUESTION 2
You work as the network administrator at www.pass4sure.cc. The www.Pass4sure.ccnetwork consists of two subnets. All servers on the www.Pass4sure.ccnetwork run Windows Server 2003 and all client computers run Windows XP Professional. All servers are located in a central data center that uses a single IP subnet and all client computers are located in one subnet.
The data center contains two routers named PassGuide -SR01 and PassGuide -SR02, two domain controllers named PassGuide -DC01 and PassGuide -DC02, and two file servers named PassGuide -SR03 and
PassGuide -SR04. The IP addresses of these servers are indicated in the table below.
Host name IP address
CERTKILLER-DC01 10.10.10.1
CERTKILLER -DC02 10.10.10.2
CERTKILLER -SR01 10.10.1.1
CERTKILLER -SR02 10.10.1.2
CERTKILLER -SR03 10.10.11.1
CERTKILLER -SR04 10.10.11.2
You have received instruction from the CIO to install a new database server in the data center. You install Windows Server 2003 on a new server computer named PassGuide -DB01 and hand it over to a database administrator named Dean
Austin. Dean Austin installs Microsoft SQL Server 2005 and makes some changes to the TCP/IP settings on PassGuide -DB01 as shown in the following table.
Parameter Value
IP address 10.10.1.3
Subnet mask 255.255.255.0
Default gateway 10.10.1.2
Later, Dean Austin complains that PassGuide -DB01 cannot communicate with the other servers in the data center. All other servers in the data center can
communicate with the other servers as well as the client computers. You log on to
PassGuide -DB01 and attempt to ping PassGuide -DC01 but you receive the following error message: “Destination host unreachable”.
What should you do to ensure that PassGuide -DB01 can communicate with the other computers in the www.Pass4sure.ccnetwork?
A. Configure PassGuide -DB01 with a default gateway of 10.10.1.1.
B. Configure PassGuide -DB01 with a subnet mask of 255.255.0.0. C. Configure PassGuide -DB01 with an IP address of 10.10.10.3.
D. Configure PassGuide -DB01 with an IP address of 10.10.11.3. Answer: B
Explanation: Large networks are subdivided to create smaller subnetworks to reduce overall network traffic by keeping local traffic on the local subnet and sending all nonlocal traffic to the router. In order to create a subnetwork, we need to have a system for addressing that allows us to use the network ID and host ID within the class-based system. This is accomplished through the use of a subnet mask. To determine the appropriate custom subnet mask (typically referred to simply as subnet mask) for a network, you must first:
1. Determine the number of host bits to be used for subnetting.
2. Determine the new subnetted network IDs.
3. Determine the IP addresses for each new subnet.
4. Determine the appropriate subnet mask. Incorrect Answers:
A: You need to assign the correct subnet mask to ensure connectivity.
C, D: The problem in this scenario is not a faulty IP address. It is the appropriate subnet mask that has to be determined to enable connectivity.
Reference:
Deborah Littlejohn Shinder, Dr. Thomas W. Shinder, Chad Todd and Laura Hunter, MCSA/MCSE: Exam 70-291: Implementing, Managing, and Maintaining a Windows Server 2003 Network Infrastructure Guide & DVD Training System, p. 57
QUESTION 3
You work as the network administrator at www.pass4sure.cc. The www.Pass4sure.ccnetwork consists of two subnets named Subnet A and Subnet B. Subnet A and Subnet B are connected by a router. All computers on the www.Pass4sure.ccnetwork are configured with static IP addresses. All network servers run Windows Server
2003 and all client computers run Windows XP Professional.
www.Pass4sure.cchires a new Sales manager named Amy Wilson. You install a new client computer named PassGuide -WS291 for Amy Wilson. You then add
PassGuide -WS291 to Subnet A. The relevant portion of the network is configured
as shown in the exhibit.
Pass4sure 70-291 2.93
Questions and Answers : 175 Q & A + 3 Real labs
Updated: October 2nd , 2008
Price: $129.99 $89.99
Free Down: Pass4sure Microsoft 70-291 2.93
Free Down: PassGuide microsoft 70-291 2.93
Download Latest Passforsure P4S Rapidshare links
- Free pass4sure Microsoft 70-431 2.93 Download
- Free pass4sure Microsoft MCSE 70-282 2.93 Download
- Free Pass4sure Microsoft MCSE 2003 Download
- Free Pass4sure Microsoft MCSE 2003 Managing Exams Download
- Free Pass4sure Microsoft MCSE 2003 Security Exams Download
- Free pass4sure Microsoft MCSE 70-270 2.93 Download
- Free Pass4sure Microsoft MCSE 70-222 2.73 Download
- Free pass4sure Microsoft MCSE 70-296 2.93 Download
- Free Pass4sure Microsoft Mcse 2003 Download
- Free pass4sure Microsoft MCSE 70-294 2.93 Download
- Free pass4sure Microsoft MCSE 70-299 2.93 Download
- Free pass4sure Microsoft MCSE 70-292 2.83 Download
- Free pass4sure Microsoft MCSE 70-284 2.73 Download
- Free Pass4sure Microsoft MCSE 70-290 2.93 Download
- Free pass4sure Microsoft MCSE 70-228 2.93 Download


i am not able to download 70-291 dumps messasge page can not be dislplay
THANK
Thank u very much,,,
is this the latest
rtr
downlode 70-291 dumps
xcv
[...] Pass4sure mcse 70-291 * MCSE Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 Network Infrastructure [...]
[...] Pass4sure 70-291 * MCSA Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 Network Infrastructure [...]
[...] Pass4sure mcse 70-291 * MCSE Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 Network Infrastructure [...]
[...] down:Pass4sure 70-291 Free Down: PassGuide 70-291 Free down:Transcender 70-291 Free down:Actualtest 70-291 Free [...]
[...] pass4sure 70-291 PassGuide 70-291 actualtest 70-291 Pass4sure Share and Enjoy: [...]