Free Pass4sure Download: Leading the way in studying IT certifications

CCIE SP Optical Qualification Exam : 350-020 Exam

Exam Number/Code: 350-020
Exam Name: CCIE SP Optical Qualification Exam
VUE Code: 350-020
Questions Type: Multiple choice,
Real Exam Question Numbers: 100 questions
Exam Language(s): English
The CCIE Communications and Services (C & S) track consists of a variety of written exams with one common lab exam. Every (C & S) exam contains a General Knowledge section that is approximately 50 percent of every (C & S) exam. The remaining 50 percent of each individual exam will contain questions regarding a specific technology.

The exam (CCIE 350-020) is an optical-focused qualification exam for the CCIE C&S certification track. Candidates must pass both a written qualification exam and a hands-on lab exam to obtain certification. The two-hour, multiple choice qualification exam is computerized, closed book, and contains 100 questions.

Exam Topics

The CCIE C&S optical topic areas listed are general guidelines for the type of content that is likely to appear on the exam; other related or relevant topic areas may also appear.

Cisco Device Operation
Commands: show, debug
Infrastructure: NVRAM, Flash, Memory & CPU, file system, config reg
Operations: file transfers, password recovery, Simple Network Management Protocol (SNMP), accessing devices, security (passwords)

General Networking Theory
OSI model: Layer comparisons, functions
General Routing Concepts: Split horizon, difference between switching and routing, summarization, Link State vs. Distance Vector, loops, tunneling
Protocol comparisons: Transmission Control Protocol (TCP), User Datagram Protocol (UDP), etc.
Standards: 802.x, protocol limitations
Protocol Mechanics: Windowing/Acknowledgements (ACK), fragmentation, maximum transmission unit (MTU), handshaking, termination

Bridging & LAN Switching
Transparent Bridging: IEEE/DEC spanning tree, Configuration Bridging Protocol Data Unit (BPDU), Integrated Routed and Bridging (IRB), Concurrent Routing and Bridging (CRB), access lists
LAN Switching: Trunking, VLAN Trunk Protocol (VTP), inter-switch link (ISL), Virtual LANs (VLANS), Fast Ether Channel (FEC), Cisco Discovery Protocol (CDP), Cisco Group Management Protocol (CGMP)

Internet Protocol (IP)
Addressing: Classless Interdomain Routing (CIDR), subnetting, Address Resolution Protocol (ARP), Network Address Translation (NAT), Hot Standby Router Protocol (HSRP)
Services: Domain Name System (DNS), Bootstrap Protocol (BOOTP), Dynamic Host Configuration Protocol (DHCP), Internet Control Message Protocol (ICMP)
Applications: Telnet, File Transfer Protocol (FTP), Trivial File Transfer Protocol (TFTP)
Transport: IP fragmentation, sockets, ports
Access Lists

IP Routing Protocols
Open Shortest Path First (OSPF):
Design: areas, virtual links, stub, not so stubby areas (NSSA), area border router (ABR) / autonomous system boundary router (ASBR) redistributions, media dependencies, external vs. internal, summarization
Operation: Designated Router (DR), Backup Designated Router (BDR), adjacencies, link-state advertisement (LSA) types, link-state database, shortest path first (SPF) algorithm, authentication

Border Gateway Protocol (BGP):
Design: Peer Groups, Route Reflectors, Confederations, Clusters, Attributes, Autonomous Systems (AS)
Operation: Route Maps, Filters, Neighbors, decision algorithm, Interior Border Gateway Protocol (IBGP), Exterior Border Gateway Protocol (EBGP)
Multi-protocol BGP – Multicast and VPN Address families

MPLS
Enhanced Interior Gateway Routing Protocol (EIGRP): Metrics, mechanics, & design
Intermediate System to Intermediate System (IS-IS): Metrics, mechanics, & design
Routing Information Protocol (RIP) & RIP v2: : Metrics, mechanics, & design
Multicast: Design, Protocol Independent Multicast (PIM – both sparse and dense), Distance Vector Multicast Routing Protocol (DVMRP), Internet Group Management Protocol (IGMP)
Access lists: distribute lists, route maps, policy routing, redistribution, route tagging

Performance Management
Traffic Management: Queuing, Weighted Fair Queuing (WFQ), Resource Reservation Protocol (RSVP), traffic shaping, load balancing ,congestion management

WAN (addressing, signaling, framing)
ISDN: Link Access Procedure on the D channel (LAPD), Basic Rate Interface (BRI) / Primary Rate Interface (PRI) framing, signaling, mapping, dialer map, interface types, B/D channels, PPP Multilink
Frame relay: Local Management Interface (LMI), Data Link Connection Identifier (DLCI), Permanent Virtual Circuit (PVC), framing, traffic shaping, forward explicit congestion notification (FECN), backward explicit congestion notification (BECN), CIR, discard eligible (DE), mapping, compression
ATM: Switched Virtual Connection (SVC) / Permanent Virtual Connection (PVC), ATM Adaptation Layer (AAL), Service Specific Connection Oriented Protocol (SSCOP), User-Network Interface (UNI) / Network-Network Interface (NNI), Interim Local Management Interface (ILMI), Cell format, Quality of Service (QoS), RFC 1483 & 1577, Private Network-Network Interface (PNNI), Interim-Interswitch Signaling Protocol (IISP), mapping

DWDM
transponder
EDFA
optical amplifier
Multiplexer
demultiplexer
optical
spectrum analysis
wavelength conversion
ITU channels
gain tilt/flatteness
Optical signal to noise (OSNR)

Dynamic Packet Transport
Intelligent Protection Switching
Automatic Protection Switching
media types

Packet over Sonet
SONET Path Overhead
Frame structure

Fiber Optics
attenuation
loss
dispersion
non-linear effects
four wave mixing
PMD
phase modulation
return loss

Cisco ONS
15454
15327
15200
15216
15800

EMS/NMS/OSS
CTM
CIC
CPC

Sonet
BLSR (bi-directional line switched ring)
UPSR (unidirectional path switched ring)

Wavelength Routing
cross connect
blocking vs. non-blocking
nxn matrix
STS granularity

Training and Preparation

The CCIE Training Classes are not required for completion of the CCIE Program. However, most candidates choose to pursue training options due to the rigorous nature of CCIE exams. For more information on Cisco training course or alternative third-party resources, visit the Cisco Training page. Some recommended classes include:

Interconnecting Cisco Network Devices
Installation and Maintenance of Cisco Routers
Building Scalable Cisco Networks
Cisco Internetwork Design
Cisco Internetwork Troubleshooting
SNA Configuration for Multiprotocol Administrators

“CCIE SP Optical Qualification Exam”, also known as 350-020 exam, is a Cisco certification.
Preparing for the 350-020 exam Searching 350-020 Test Questions, 350-020 Exam, 350-020 Dumps

With the complete collection of questions and answers Q&as with Expert Explanations, Pass4sure has assembled to take you through 400 questions to your 350-020 Exam preparation. In the 350-020 exam resources, you will cover every field and category in CCIE helping to ready you for your successful Cisco Certification.

QUESTION 11:
How many E-1s can be aggregated (maximum) and mapped into a VC-12 Signal?
A. 1
B. 7
C. 14
D. 28
E. 32
Answer: A
QUESTION 12:
What is Fast EtherChannel?
A. A feature to bundle multiple Ethernet point-to-point links quickly into one
logical high speed link
B. A feature to bundle multiple Fast-Ethernet point-to-point links into one logical
350-020
Actualtests.com – The Power of Knowing
high speed link
C. Another name for full-duplex Fast Ethernet
D. Another name for Gigabit Ethernet
E. None of the above
Answer: B
QUESTION 13:
Exhibit:
A customer has improperly installed a 2-node OC-12 SRP ring using dark fiber.
Based on the printout from each node shown in the exhibit, what is the problem?
A. Misconfigured timing
B. Single faulty span or fiber between nodes
C. A-B side SRP interfaces are fiber-looped on each node
D. A-B side TX-TX and RX-RX fibers connected between nodes
E. A-A and B-B side SRP interfaces connected between nodes
Answer: C
QUESTION 14:
Exhibit:
350-020
www.actualtest.org – The Power of Knowing
Which are the two possible circuit sizes for an E-series shared packet ring in the
network shown in the exhibit?
A. STS-1
B. STS-3c
C. STS-6c
D. STS-9c
E. STS-12c
Answer: A,B
QUESTION 15:
Exhibit:
Upon deleting an IOS image file from flash, an execution of show flash shows the file
still in flash, with a ‘D’ preceding it (as shown in the exhibit). What step must be
taken in order to remove the file completely?
A. Erase the file from flash
B. Format the flash device
C. Replace the flash card – it is defective
D. Execute a squeeze command on the flash device
350-020
www.actualtest.org – The Power of Knowing
Answer: D

pass4sure 350-020 Questions and Answers : 400 Q&As
Updated: October 1st , 2008
Price: $78 $99.99

Free download:pass4sure 350-020 3.10
Free download:PassGuide 350-020 3.10

password:www.ciscoexams.org

Download Latest Passforsure P4S Rapidshare links

1. Free pass4sure ccie 350-023 v2.95 Download
2. Free Internetwork Expert CCIE Lab Strategy A Structured Approach Download
3. Free Download Pass4sure ccie R&s 350-001 2.95 3.10 Download
4. Free pass4sure ccie 350-018 2.95 Download
5. Free Pass4sure Cisco CCIE Exam 350-001 v2.95 Download
6. Free pass4sure ccie 350-001 labs Download
7. Free pass4sure ccie 350-024 2.83 Download
8. Free TestKing CISCO CCIE Lab Download
9. Free P4s Cisco CCIE Exam 350-018 2.95 3.10 3.23 Download
10. Free pass4sure ccie 350-018 v2.93 Download
11. Free PassGuide ccie 350-001 06/25/2008 Download
12. Free P4S: For all CCIE tracks Download
13. Free CCIE Download
14. Free free PassGuide cisco ccna ccnp ccie demo exam Download
15. Free Pass4sure CCIE Bundle 350-001 350-018 Download