Free pass4sure ccsp 642-503 v2.93 Download

it’s p4s latest version for ccsp Securing Networks with Cisco Routers and Switches : 642-503 Exam
642-503 SNRS
Securing Networks with Cisco Routers and Switches Exam

Exam Number: 642-503
Associated Certifications: CCSP
Duration: 75 minutes (53 questions)
Available Languages: English
Click Here to Register: Pearson VUE
Exam Policies: Read current policies and requirements
Exam Tutorial: Review type of exam questions

Exam Description Introduction Exam Topics Recommended Training Additional Resources
Exam Description Introduction
The Securing Networks With Cisco Routers and Switches exam (SNRS 642-503) is one of the exams associated with the Cisco Certified Security Professional certification. Candidates can prepare for this exam by taking the SNRS v2.0 course. This exam includes simulations and tests a candidate’s knowledge and ability to secure networks using Cisco routers and switches.

Exam Topics
The following information provides general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes the guidelines below may change at any time without notice.

Implement Cisco Layer 2 security
Utilize Cisco IOS commands to mitigate Layer 2 attacks
Implement Cisco Identity-Based Networking Services on Cisco Catalyst Switches
Implement Identity Management using ACS as the Authentication Server

Configure Cisco IOS Firewalls to mitigate network threats using the CLI
Identify and describe the advanced capabilities of the IOS firewall feature set
Configure IOS Firewall to dynamically mitigate identified threats to the network
Verify and troubleshoot IOS Firewall configuration and operation.
Configure authentication proxy to apply security policies on a per-user basis
Verify and troubleshoot authentication proxy configuration and operation
Configure IOS zone-based Firewalls
Troubleshoot Zone-based Firewalls
Configure APPFW application Firewalls
Configure Granular Protocol Inspection

Configure Cisco IOS IPS to identify and mitigate threats to network resources using the CLI
Identify and describe the advanced capabilities of the IOS-IPS feature
Configure the IPS features to identify threats and dynamically block them from entering the network
Verify and troubleshoot IPS operation

Configure Cisco VPNs to provide secure connectivity for site-to-site and remote access communications using the CLI
Describe IPSec features and functionality
Configure secure connectivity for site-to-site IPSec VPN using pre-shared keys
Describe GRE features and functionality
Configure secure connectivity for site-to-site VPN using certificate authorities
Describe DMVPN features and functionality
Configure secure connectivity for site-to-site VPN using DMVPN
Verify and troubleshoot secure site-to-site connectivity operations
Implement Clientless IOS SSL VPN
Verify Clientless IOS SSL VPNs
Configure Easy VPN server with pre-shared keys

Configure Authentication, Authorization, and Accounting to provide basic secure access control for networks
Configure administrative access to the CSACS server
Configure CSACS system settings
Configure AAA clients on the CSACS
Configure users, groups and access rights
Configure shared profile components in CSACS
Configure network access profiles in CSACS
Configure NADS to enable AAA to use a Radius Server
Verify and troubleshoot AAA operation

Implement Network Foundation Protection using the CLI
Describe NFP features and functionality
Secure the management plane using Cisco IOS security features
Secure the data plane using Cisco IOS security features
Secure the control plane using Cisco IOS security features

“Securing Networks with Cisco Routers and Switches”, also known as 642-503 exam, is a Cisco certification.
Preparing for the 642-503 exam Searching 642-503 Test Questions, 642-503 Exam, 642-503 Dumps

With the complete collection of questions and answers Q&as with Expert Explanations, Pass4sure has assembled to take you through 53 Q&As to your 642-503 Exam preparation. In the 642-503 exam resources, you will cover every field and category in CCSP helping to ready you for your successful Cisco Certification.

QUESTION 16:
ACS administrators use which URI (Uniform Resource Identifier) port to access the
Cisco ACS web interface?
A. 2002
B. 80
C. 443
D. 8080
E. 22
F. 127
Answer: A
Explanation:
Just about any administration tasks can be performed in the Cisco Secure ACS web
642-503
www.actualtest.org- The Power of Knowing
interface. You access the web interface by browsing to http://:2002.
Reference: CCSP SNRS Quick Reference Sheets
Example
The following example URIs and their component parts (taken loosely from RFC 3986 -
STD 66):
QUESTION 17:
Please study the exhibit carefully.
Which optional AAA or RADIUS configuration command is used to support 802.1x
guest VLAN functionality?
A. aaa authentication dot1x default group radius
B. radius-server host 10.1.1.1 auth-port 1812 acct-port 1813
C. aaa accounting dot1x default start-stop group radius
D. aaa accounting system default start-stop group radius
E. aaa authorization network default group radius
Answer: E
Explanation:
Configuration for 802.1x:
Enable AAA with the “aaa new-model” command.
Specify authentication list for 802.1x with the “aaa authentication dot1x {default}
method” command.
Enable 802.1x authentication globally with the “dot1x system-auth-control” command
To activate 802.1x port-based authentication on a specific port, use the interface
configuration command “dot1x port-control {auto | force-authorized | force-unauthorized
}”
The “aaa authorization network default group radius” command is typically used on the
routers for user authorization of all network-related service requests, such as PPP, SLIP
and ARAP. However, in the context of the Catalyst switch, it allows RADIUS server
642-503
www.actualtest.org- The Power of Knowing
authorization of VLAN assignment or per-user ACL’s.
Three tunnel attributez are used for RADIUS VLAN assignment:
Attribute 64 : Tunnel-Type=VLAN (type 13)
Attribute 65 : Tunnel-Medium-Type=802 (type 6)
Attribute 81 : Tunnel-Private-Group-ID=VLANID
The first two attributes have an integer value, and the last one is a text string identifying
the VLAN name.
Reference: CCSP SNRS Exam Certification Guide
QUESTION 18:
DRAG DROP
You work as a network technician at PassGuide .com. Your boss, miss PassGuide, is
interested in NFP (Network Foundation Protection) features. Match the proper features
with appropriate descriptions.
Answer:
QUESTION 19:
642-503
www.actualtest.org – The Power of Knowing
DRAG DROP
You work as a network technician at PassGuide .com. Your boss, miss PassGuide, is
interested in Cisco IOS Firewall features. Match the proper features with appropriate
descriptions.
Note: not all features are used.
642-503
www.actualtest.org- The Power of Knowing
Answer:
QUESTION 20:
DRAG DROP
You work as a network technician at PassGuide .com. Your boss, miss PassGuide, is
interested in ACS 4.0 component functions. Match the proper components with
appropriate functions.
642-503
www.actualtest.org- The Power of Knowing
Answer: