Free PassGuide ccie 350-001 06/25/2008 Download

CCIE-ROUTING AND SWITCHING QUALIFICATION (Written exam) : 350-001 Exam

Exam Number/Code: 350-001
Exam Name:CCIE-ROUTING AND SWITCHING QUALIFICATION (Written exam)

“CCIE-ROUTING AND SWITCHING QUALIFICATION (Written exam)”, also known as 350-001 exam, is a Cisco certification. With the complete collection of questions and answers Q&as with Expert Explanations, PassGuide has assembled to take you through 361 Q&As to your 350-001 Exam preparation. In the 350-001 exam resources, you will cover every field and category in CCIE helping to ready you for your successful Cisco Certification.
Free Demo DownloadPassGuide offers free demo for 350-001 exam (CCIE-ROUTING AND SWITCHING QUALIFICATION (Written exam)). You can check out the interface, question quality and usability of our practice exams before you decide to buy it.

VCE PDF EPAD bootcamp training bible DetailsThe written exam is a two-hour, multiple choice test with 100 questions covering Routing and Switching networking theory related to topics such as IP, IP routing, non-IP desktop protocols, bridging and switch-related technologies, and includes some equipment commands. The exam is closed book and no outside reference materials are allowed.

(CEF) has been enabled on all PassGuide routers. What
table contains a mirror image of the forwarding information in the IP routing table
used in CEF switching?
A. Field information base
B. Forwarding information base
C. Filed information based
D. Forwarding information based
E. Forwarding instant based
F. None of the above
Answer: B
Explanation:
Forwarding Information Base:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based
switching decisions. The FIB is conceptually similar to a routing table or information
base. It maintains a mirror image of the forwarding information contained in the IP
routing table. When routing or topology changes occur in the network, the IP routing
table is updated, and those changes are reflected in the FIB. The FIB maintains next-hop
address information based on the information in the IP routing table.
Because there is a one-to-one correlation between FIB entries and routing table entries,
the FIB contains all known routes and eliminates the need for route cache maintenance
that is associated with switching paths such as fast switching and optimum switching.
Reference:

http://www.cisco.com/en/US/docs/ios/12_1/switch/configuration/guide/xcdcef.html

QUESTION 27
Network Topology Exhibit:
350-001
Actualtests.com – The Power of Knowing
PassGuide 1 configuration exhibit:
PassGuide 3 configuration exhibit:
You work as a network engineer at PassGuide . Based on the information provided
above, what statement is correct regarding the configurations in the figures?
A. The RIP metric between PassGuide 1 and PassGuide 3 is 3 because the offset-list
command is changing the metric to 3 by adding 2 to the existing metric.
B. The RIP metric cannot be changed and Load sharing will done between the two paths
that exist from PassGuide 1 to PassGuide 3 (and vice-versa) because the offset-list command
is specifying that there be a 2:1 load sharing ratio for the two paths.
C. The RIP metric between PassGuide 1 and PassGuide 3 is 2 because the offset-list
command is changing the metric to 2.
D. The RIP metric between PassGuide 1 and PassGuide 3 remains 1.
E. None of the above
Answer: A
Explanation:
The offset value is added to the routing metric. An offset list with an interface type and
interface number is considered extended and takes precedence over an offset list that is
not extended. Therefore, if an entry passes the extended offset list and the normal offset
list, the offset of the extended offset list is added to the metric. In this case, an offset of 2
is added to the routing update, making the total RIP metric 3.
QUESTION 28
You have issues the “clear ip route *” command on router CK1 . What would occur
as a result of this command being issued?
A. A router would recalculate its entire routing table and re-establish its neighbor
relationships.
350-001
www.actualtest.org – The Power of Knowing
B. Only its neighbor relationships would be re-established.
C. Only link state routing protocols would be recalculated and only those neighbor
relationships re-established.
D. A router would recalculate its entire routing table but its neighbor relationships would
not be affected.
E. None of the above
Answer: D
Explanation:
The use of the * means that all routing table entries will be deleted within the routing
table, forcing the router to calculate a new routing table. The underlying neighbor
adjacencies are not affected by this command. To force the router to re-establish neighbor
relationships, the “clear ip xxx neighbor” command, where xxx is the routing protocol in
use. For example, to clear all of the OSPF neighbor relationships use the “clear ip ospf
neighbor” command.
QUESTION 29
The PassGuide multi-protocol network is shown below:
Part of the router configurations for PassGuide 2 is also shown below:
350-001
www.actualtest.org – The Power of Knowing
You work as a network engineer at PassGuide .com. Please study the exhibits
carefully. Router PassGuide 2 wants to redistribute all the routes in the RIP domain
into the EIGRP domain but the network 170.170.0.0/16 is not being installed into
Router PassGuide 2 routing table. What could fix the problem?
A. Redistribute RIP into EIGRP 20 and filter route 170.170.0.0
B. Redistribute RIP into OSPF 30
C. Redistribute OSPF into EIGRP 20
D. Filter route 170.170.0.0 from RIP
E. Filter route 170.170.0.0. from OSPF
F. None of the above
Answer: E
Explanation:
Since OSPF has a lower administrative distance than RIP, PassGuide 2 will install the
172.17.0.0/16 route learned via OSPF, and not RIP. Since router PassGuide 2 is only
redistributing RIP routes into EIGRP, this route will not be installed included. Filtering
this 172.17.0.0/16 route from OSPF will force the router to accept the RIP learned route
and then redistribute it into EIGRP.
350-001
www.actualtest.org – The Power of Knowing
QUESTION 30
The PassGuide multi-protocol network topology is displayed below:
Please study the exhibit above carefully. Router PassGuide 23 (in area 2) is
redistributing routes learned from BGP into the OSPF process. PassGuide 24 will
generate what OSPF LSA types for advertisement to area 0? (Choose three)
A. Type 4 – ASBR Summary LSAs
B. Type 5 – AS External LSAs
C. Type 1 – Router LSAs
D. Type 3 – Network Summary LSAs
E. Type 2 – Network LSAs
Answer: A, B, D